Quick Installation Videos
Questions on how to install and use our Hydration Accessories. Please click on our links below for Videos and Information.
Installing a Neoprene Insulated Drink Tube Cover
***These hydration tube covers are simple to install. Just remove the bite valve or the base connector at the opposite end of the drink tube and slide the hose cover using the push-pull method seen in the video. If you find you are struggling and feel the tube cover is too tight, please don't hesitate to Email Us
***Recommended Care to hand wash only. use mild soap. rinse thoroughly band allow adequate drying time. (Putting your tube cover in a washer could cause it to get tangled around the washing spindle and is not recommend).
***Do not cut your tube cover. The continuous stitch will come unraveled. Please Email Us if you need a larger diameter or a different length.
Cordura Tube Cover
***These hydration tube covers are simple to install. Just remove the bite valve or the base connector at the opposite end of the drink tube if the cordura cover doesn't fit over the bite valve or base connector. Slide the hose cover using the push-pull method to get it started. Keeping the drink tube straight, grab the corner of the cordura cover (as seen in the video) and pull up the tube. This helps slides on easier. If you find you are struggling and feel the tube cover is too tight, please don't hesitate to Email Us
***We have several Bladder Installation videos. Please click the bladder - reservoir you have and the link will take you to our YouTube Installation Video. If you have a different brand of bladder - reservoir not listed, please Email Us
Lanyard Clip Installation
***Easiest way to open the lanyard clip is by holding the jaws together while using your other hand to press down on the opposite end.
Strap Manager / Web Dominator Installation
***These strap managers can have multiple functions. Use these as a strap manager, drink tube holder, radio or camera wire keeper, and more.